NC-DRILL JOB REPORT FILE:C:\EDWin 2000\User\Proton Smart_Card\Smart_App_Board.DJR
Send this report file to the manufacturer along
with below listed NC-Drill database file

NC-Drill database file name: Smart_App_Board.NCD

NC OUTPUT FROM: EDWin 2000 (VER. 1.1 REV. 20011025)   
BOARD Smart_App_Board    
   
PIN HOLES  VIAS  TOP - BOTTOM    
ASCII ABSOLUTE  INCH  
FORMAT 2. 4 TRAILING ZEROS OMITTED  

PATCH- 0    
TOOLS USED (INCH / MM)  
T01-0.020 / 0.5 ( 67)   
T02-0.032 / 0.8 ( 2)   
T03-0.035 / 0.9 ( 33)   
T04-0.036 / 0.9 ( 8)   
T05-0.040 / 1.0 ( 13)   
T06-0.043 / 1.1 ( 4)   
T07-0.059 / 1.5 ( 2)   
T08-0.100 / 2.5 ( 4)   
STOP 
T01-0.110 / 2.8 ( 3)   
T02-0.130 / 3.3 ( 6)   
STOP