NC-DRILL JOB REPORT FILE:C:\EDWin 2000\User\PROTON_SER_GLCD\PROTON_SER_GLCD.DJR
Send this report file to the manufacturer along
with below listed NC-Drill database file

NC-Drill database file name: PROTON_SER_GLCD.NCD

NC OUTPUT FROM: EDWin 2000 (VER. 1.1 REV. 20011025)   
BOARD PROTON_SER_GLCD    
   
PIN HOLES  VIAS  TOP - BOTTOM    
ASCII ABSOLUTE  INCH  
FORMAT 2. 4 TRAILING ZEROS OMITTED  

PATCH- 0    
TOOLS USED (INCH / MM)  
T01-0.020 / 0.5 ( 72)   
T02-0.032 / 0.8 ( 2)   
T03-0.035 / 0.9 ( 14)   
T04-0.036 / 0.9 ( 24)   
T05-0.040 / 1.0 ( 19)   
T06-0.043 / 1.1 ( 4)   
T07-0.130 / 3.3 ( 5)   
T08-0.157 / 4.0 ( 4)   
STOP