[SOLVED !] Minor issue with Uart calc on 3.5.5.4


Closed Thread
Results 1 to 3 of 3

Thread: Minor issue with Uart calc on 3.5.5.42845 days old

  1. #1
    Kapitan
    Guest Kapitan's Avatar

    0 Not allowed!

    Default Minor issue with Uart calc on 3.5.5.4

    Hi Dave
    your superb plugin has a very minor issue with the latest forced declares in 3554 PDS.
    It needs a forced declare as in :

    ;Calculated Baudrate = 9604 @ Xtal 32MHz, Error = 0.04%
    Declare Hserial_RCSTA = 144 ; Enable continuous receive
    Declare Hserial_TXSTA = 36 ; Enable transmit, BRGH = 1
    Declare Hserial_Clear = On ; Clear overflow automatically
    Declare Hserial_SPBRG = 64 ; Baud Rate Generator Low Byte Value
    SPBRGH = 3 ; Baud Rate Generator High Byte Value
    BAUDCON.3 = 1 ; Enable the 16 bit Baud Rate Generator

    Cheers sir
    Joe

  2. Attention

    This valuable resource relies upon the very small amount of revenue generated by displaying online advertisements to our visitors.

    The advertisements we display are relevant to this web site and your browsing history

    Please consider supporting us by disabling your ad blocker.


    Note: Some users have reported issues related to ad-blockers rendering parts of this wesite unusable,
    where possible we will rectify the issues to enable you to use this resource with adblocking enabled.

    If you can, please report issues in the forum area WebSite / Forum Issues


    Thank you for your attention.

  3. #2
    Senior Member DaveS's Avatar
    Join Date
    Aug 2004
    Posts
    905
    Thumbs Up
    Received: 10
    Given: 4
    Total Downloaded
    1.76 GB

    0 Not allowed!

    Default Re: Minor issue with Uart calc on 3.5.5.4

    Hi Joe

    Try this, if alls okay I will create a install package.
    Replace EUSART_Calc.exe in
    "Program Files Directory"\ProtonIDE\Plugin\DaveS Tools\EUSART_Calculator\
    with the new file in EUSART_Calc.zip

    Thanks.
    Regards
    Dave

  4. Attention

    This valuable resource relies upon the very small amount of revenue generated by displaying online advertisements to our visitors.

    The advertisements we display are relevant to this web site and your browsing history

    Please consider supporting us by disabling your ad blocker.


    Note: Some users have reported issues related to ad-blockers rendering parts of this wesite unusable,
    where possible we will rectify the issues to enable you to use this resource with adblocking enabled.

    If you can, please report issues in the forum area WebSite / Forum Issues


    Thank you for your attention.

  5. #3
    Kapitan
    Guest Kapitan's Avatar

    0 Not allowed!

    Default Re: Minor issue with Uart calc on 3.5.5.4

    Quote Originally Posted by DaveS View Post
    Hi Joe

    Try this, if alls okay I will create a install package.
    Replace EUSART_Calc.exe in
    "Program Files Directory"\ProtonIDE\Plugin\DaveS Tools\EUSART_Calculator\
    with the new file in Attachment 1652

    Thanks.
    Hi Dave
    That works a treat sir
    I cannot break it, all superb.
    Along with John GB Fuse config, this is a 100% MUST HAVE for PDS. The best just got better.
    Thanks for your superb support and plugins. As always.
    You should consider payware as your work is so darn good, I know that may not be what you intend, but, some people are happy to pay for quality.
    Even a paypal 'donate' - hey, it pays the bills and shows appreciation
    Joe.

  6. Attention

    This valuable resource relies upon the very small amount of revenue generated by displaying online advertisements to our visitors.

    The advertisements we display are relevant to this web site and your browsing history

    Please consider supporting us by disabling your ad blocker.


    Note: Some users have reported issues related to ad-blockers rendering parts of this wesite unusable,
    where possible we will rectify the issues to enable you to use this resource with adblocking enabled.

    If you can, please report issues in the forum area WebSite / Forum Issues


    Thank you for your attention.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Algo help for flow rate calc
    By Tim in forum The Lounge
    Replies: 3
    Last Post: 9th August 2015, 10:57
  2. USART-EUSART-Calc Updated
    By DaveS in forum DaveS Feedback Forum
    Replies: 1
    Last Post: 31st January 2013, 03:24
  3. Pic timer calc
    By C_Moore in forum The Lounge
    Replies: 4
    Last Post: 4th May 2010, 12:27
  4. A minor issue when passing Values
    By johngb in forum Proton Plus Compiler v3
    Replies: 2
    Last Post: 8th January 2005, 11:06

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts