Search:

Type: Posts; User: GAMBOA

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Thread: Proton Studio

    by GAMBOA
    Replies
    36
    Views
    37

    Re: Proton Studio

    John,

    The first of all is to thank John for his good work in the proton Studio. A program like this is not done in a few hours.
    So it is necessary to recognize the effort made by John and made...
  2. Replies
    10
    Views
    11

    Re: Hot mosfet Do I worry?

    Hi Tim,

    The VGS voltage is very important so that the RDS resistance is as low as possible. A VGS of -4V is not the same as a VGS of -10V for the purposes of the RDS value. What is the voltage at...
  3. Replies
    6
    Views
    7

    Re: Pic24 and LCD display question

    Hi list,

    I have made the checks of the pins and all the pins of the display work as digital.
    Then I have adjusted the LCD DECLARES as indicated by Les and everything is working correctly.
    So...
  4. Replies
    6
    Views
    7

    Pic24 and LCD display question

    Hi list,

    I have got a PCB with a PI24FJ64GA306 and a 16x2 alphanumeric LCD display (Hitachi HD44780). It has a problem because it shows nothing on the display....
  5. Replies
    11
    Views
    12

    Re: Timer1 overflows

    Hi Saluposas,

    I have not used that mic but I used the PIC18F65K22 at 16MHz with the Timer 1 to count 1 second.
    What I do is use an interruption for timer 1 and as it is not possible with only...
  6. Replies
    7
    Views
    8

    Re: SPI to MX25L4006E Flash PROM

    An other option is:

    http://www.pctestinstruments.com/index.htm
    386USD

    Regards,
    Gamboa
  7. Replies
    17
    Views
    18

    Re: Sub-EndSub and Gosub-Return

    Hi list,

    My experience with PIC24 (PIC24FJ64GA306) has been very positive. I have worked on two projects and everything has worked correctly. The projects have not been complex, only...
  8. Replies
    26
    Views
    27

    Re: Which IDE are you all using?

    Proton Studio is a nice name
  9. Replies
    26
    Views
    27

    Re: Which IDE are you all using?

    Hi,
    These features cover the needs of any user. I think it will be an excellent tool.

    What will the new creature be called? JB IDE for Protón?

    Regards,
    Gamboa
  10. Replies
    26
    Views
    27

    Re: Which IDE are you all using?

    Jhongb,

    I have used some of the plug-ins that you have developed as Fuse Configurator and they work very well. So I have no doubt that the "New Proton IDE" will be a good product.

    Regards,...
  11. Re: Test with Proton 3.6.1.0. The labels disappear

    Thank you Les.

    Regards,
    Gamboa
  12. Test with Proton 3.6.1.0. The labels disappear

    I am testing version 3.6.1.0 for the PIC18F25K22. Compile well and execute well. But in the IDE Labels disappear. Is there any way to make them appear?

    3483
  13. Replies
    26
    Views
    27

    Re: Which IDE are you all using?

    Hi list,

    I tried notepad ++ but I have not managed to make it work.
    I have also tried FineLine, but I do not get used to its use.
    My work tool is Proton IDE.

    Regards,
    Gamboa
  14. Replies
    25
    Views
    26

    Re: Just to let you know

    Thank you.

    "That's one small step for man, one giant leap for mankind." Neil Armtrong.

    Regards,
    Gamboa
  15. Replies
    15
    Views
    16

    Re: Re. latest vweaion 3.6.0.7

    Hi,

    Great job Les! You're the greatest! I hope you recover soon from your injury.

    Regards,
    Gamboa
  16. Thread: Nsoic-8

    by GAMBOA
    Replies
    7
    Views
    8

    Re: Nsoic-8

    3477
    Pad dimension: 2.2x06mm in IPC medium Density.
    Centerpad to center pad diferent lane: 4.826mm
    Pich: 1.27mm

    Regards,
    Gamboa
  17. Replies
    3
    Views
    4

    Re: Lithium battery woes

    Shantanu,

    I used the DS3231SN # chip (40 pieces) years ago. I have not had problems. My circuit was with CR2032 directly connected. In 2007, the purchase price was € 2.70. The current price can be...
  18. Replies
    8
    Views
    9

    Re: 3.3v circuit from a LiPo cell

    Hi,

    In this article you can see the idea that I told you. It describes the external control with a TI circuit but you can use the ADC of the PIC microcontroller to measure the battery voltage...
  19. Replies
    8
    Views
    9

    Re: 3.3v circuit from a LiPo cell

    hi,
    Another way would be to use an LDO with Power Good (LP5912-3.3DRVR), then do the bypass externally with a MOSFET through your PIC.
    Regards,
    Gamboa
  20. Replies
    8
    Views
    9

    Re: 3.3v circuit from a LiPo cell

    Hi,
    I think the best thing for this would be to put an LDO with bypass. When the voltage is higher than 3.6 the LDO works and when it is lower the voltage goes directly. I have not used this, but I...
  21. Replies
    8
    Views
    9

    Re: Which version P24 am I running?

    Hi Tim,
    You can open *.asm file generated and you can see:

    ;----------------------------------------------------------
    ; code produced by proton24 1.0.4.1
    ; written by les johnson. april 2017...
  22. Re: Getting old, need help on suitability ttl vers RS232

    Hi Tim,

    If the electric motors get to disturb the data line, a TTL based system with or without CRC will not work. You have two options: pray that there is no interference or put a more robust...
  23. Replies
    2
    Views
    3

    Re: infrared image of dsPIC

    Nice Ken.

    Model of IR camera?

    Regards,
    Gamboa
  24. Re: H bridge driver for 12v Motor recomendations

    Hi Tim,
    To avoid noise I always use galvanic isolation. See the attachment. The circuit is more expensive.3434
  25. Replies
    11
    Views
    12

    Sticky: Re: Donations to Les Johnson

    I like that this post is in the "What's New" menu

    Regards,
    Gamboa
  26. Thread: Forum slow

    by GAMBOA
    Replies
    9
    Views
    10

    Re: Forum slow

    John,
    No problem with Firefox 57, 64bit.
    Regards,
    Gamboa
  27. Replies
    15
    Views
    16

    Re: Merry Christmas and Happy New Year Les!!!

    Hi,

    Somehow this post continues in this other:
    http://www.protonbasic.co.uk/showthread.php/77795-Support-for-Les...-a-change-of-heart

    Regards,
  28. Replies
    19
    Views
    20

    Re: Numeric conversion trouble

    Nex,

    Try with VAL command. Pag. 402 Manual.

    Example 2
    ' Convert a string of decimal characters to an integer
    Include "Proton_4.Inc" ' Use the Proton board for the demo
    DimString1[10] as...
  29. Replies
    15
    Views
    16

    Merry Christmas and Happy New Year Les!!!

    Dear Les,

    This text is an express acknowledgment of the great effort made by Les to develop Proton and Proton 24.
    Thank you Les.
    I have been working on a project for a few weeks in which I use...
  30. Replies
    21
    Views
    22

    Re: Ram Variable Bytes 18F86J55

    Hi list,

    Silicon Labs CP2102N 1.33€ (10 pieces Mouser)
    FTDI FT230XQ 1.73€ (1 piece Mouser)
    Microchip MCP2200 1.79€ (10 pieces Mouser)

    Regards,
    Gamboa
  31. [SOLVED !] Re: Taking advantage of the internal voltage references of the 18F25k22 chip on ADC c

    Hi Yves,

    I dont use Amicus18.
    I used Pic18F26K22 for a project adjusting FRV for the ADC. Basically what I do is adjust the FSR registers directly.

    Initialization of registers SFR:


    ...
  32. Thread: Tranceiver

    by GAMBOA
    Replies
    19
    Views
    20

    Re: Tranceiver

    Fanie,

    See in Microchip Lora
    http://www.microchip.com/design-centers/wireless-connectivity/embedded-wireless/lora-technology

    Regards,
    Gamboa
  33. Replies
    5
    Views
    6

    Re: Library manger missing file warning

    Hi Bob,
    In life, things are repeated, the prosperity of many is based on the sacrifice of a few. It is something I observe day by day, at work, with my children, etc.

    Regards,
    Gamboa
  34. Replies
    16
    Views
    17

    Re: Add compile data to hex file

    Hi Rick,

    You can add the version number to the name file.

    For example: Titanium_3_06.hex

    Regards,
    Gamboa
  35. Replies
    16
    Views
    17

    Re: Add compile data to hex file

    Hi Rick,

    In the ASM file you can see:

    ;----------------------------------------------------------
    ; Code Produced by the Proton Compiler. Ver 3.5.6.7
    ; Copyright Rosetta...
Results 1 to 35 of 100
Page 1 of 3 1 2 3