Search:

i installed the exe driver for win7 64bit
but nothing....doesnt recognized

The key doesnt install under win 10.
How to solve it ?

Of Course.
All config as well

i use this command:
HSerIn 6000,ConTimeOut,[Wait("SEND OK",13,10),GotData]
but it's doesn't recognized the pattern, inspite it's comes

It's worked perfecly with the previous proton version
I...

Thank a lot for direction.
Do you know to config the known i2c display ?

Best Regards
Erez

Hi

i bought 1602 2X16 LCD for Arduino with I2C module
http://www.banggood.com/IIC-I2C-1602-Blue-Backlight-LCD-Display-Module-For-Arduino-p-950726.html

Can i use it with 16f688 (it's no has I2C...

Ok, i did it by 18f45k22 and all the analogs works perfectly.

So now, the big mistry, what are the problem, and how to solve that ?

Erez

Dear Steve

Yes, the analogs 0-27 (except 15-19 there in not in 18f45k50 or using for uart) works individually, and together in their group (0-14 and 20-27)
but it the progran try to make reading...

Yes it make crazy try understad the logic this case.
Matix is only sipmle connections between the chips.
There are only VCC, GND and TX that connecting my MAX232, and one "fly" wire from the VCC, i...

I tried your suggestion, it's the same of mine sorry.
Analogs 20-27 works only.

Best Regards
Erez

i'll try it.
You mean call from main, by gosub to the sub you've written ?

First of all, thank you very much for checking the analogs with 18f45k22, so i've made order some units of it, to solve 18f45k22 the problem for meantime....
Next, the 18f45k50 installed in lovely...

Yes, i did thus from the begining in the main manu and in sub menu.
I did the separation to blocks, artificially, when i tried to find out what is the problem, and what is the ok for analog range,...

first, what you decribed it's right.
If i operate block 1 or block 2 (seperatly) thier analogs works well
When i operate both of them, only block 2 works.

I tell you why i'm think (99%) it's not...

There is nothing logically could explain the facts about the analogs reading :
The mirco reads all the analogs, but no if it's request in one program between the blocks (remember that the...

I make it so simple.put the micro in matrix, connect to urat converter, and connecting GND to pins.
In my micro, as you could see the conversation, if i defined all the analogs, only 20 to 27 works....

i tried but nothing....

Dear Steve, did you check if the A/D are correct ?
Because i'm get 1023, but it i read from all the analogs, it's not read really analog, just gives 1023 always.

This reson, i checked the analog...

i made the tests again :
block1 and 2 or block 2 and 1 = only block 2 works
separatly, the works well...

Thanks
Erez

I tried it also, but it's doesn't work.
Also no ADIN in the main (without any subs) or sub call (call block2 from block1)

Thanks

Erez

Thank you for help trials.
Of mine sorry, nothing works...

The I cancel everything, including interrupts, watch dog, comparators
Attatched the code

Thank you

Erez...

(using compiler ver 3.5.6.7)
When i try to read all the analogs (except 2 sitting on Tx Rx) in 18f45k50, it's defective the a/d values (gives 1023 always)
i found that logically, the analogs have...

This is the code.
It's never got interrupt...

;-------------------------------------------------------------------------------
;**** Added by Fuse Configurator ****
; Use the Fuse Configurator...

Dear All

I'm working with 18f45k50 and try to get interrupt from uart (Rx).
Like all the micro others, i configed intcon=%11000000, pie.5=1, pir.5=1 but nothing,
but no interrupt inspite serial...

A lot of thanks to Joseph, the 16f688 works well.
For the others, lets see the configuration code to 16f688 for internal oscillator 8MHZ :
It's works well serial including Rx interrupting:
To the...

Sorry for mistake, clever, of course...

Thank you for cleaver answers.
I'm implement that right now

Erez

First, it was a question.
Sec, the excat configuraion (with the xtal=8 etc without OSCCON and OSCTUNE) i saw in these forums,in post some years ago.
So i thought the compiler complete the...

Ok
I found that it's work when the xtal=4 only...
I think the *** is in the compiler.

How the technical support got the infomation to fix it ?

Best regards
Erez

Dear all.

I want use in 16f688 with internal oscillator and to transmit data via the URAT 9600 baud no parity.
Somehow, all the data i get is gibberish.
What i think it' the internal oscillator...

Yes, you right, now it's workink

COOL !!!!

Thank you very much !!!!!


Erez

No, it's not the same password...
Don't know why they make password to data file like that
If it's not bother for you to download it and paste in this forum, I'll thank you very much !

Best...

Thank you very much for the link, but to download it i have to "password required"....
Isn't like the password in Proton site, so i can't download the file

Regards
Erez

Dear all.

I'm working the last version of proton 3.5.6.7.
Under the list in Help menu>Pic18 Config fuses, there are no document for 18f45K50..............

I want use with internal OSC
Someone...

This 16f1455 is unregular to the family, its tiny (14 pins), including usb port and internal clock.
Please look at the datasheet in this link...

Thank you, now i succeed to download the file.
Next days i test it.
hope it will working my micros (PIC18F45K50-I/P and with PIC16F1455-I/P)

Best Regards
Erez

I looked a lot and found links to softwares (ocx), but all of them broken....

Dear all.

I buy some devices of 16f1455 and PIC18F45K50.
I want to transfer data from the computer to the micro, I never worked usb with any micro.

How to start ?
How to program the micro to...

Well my friends, i'm working with the latest update compiler vertion 3.2.5.5, and i know proton some years and like it very much.

So, dear Tim, as i understand you, peek and poke supposed to work...

Dear Tim, i'm talking about POKE, the syntext has written in the begging of this issue already (i quote it for you again)
I used it at 16f877

if do you want more explanations please tell me :...

____________________________________________________________________
Why take off these important commands (peek & poke) insteed just fix the bugs ?
This commads exist properly all the other pic's...

Recently i bought Proton complier
I updated it to the last version
It's look great but i found some serious bugs :

1.When i write the command
"CWrite...

Hi

I update the compiler via the internet, and my anti virus (Avira) found a virus in App.exe.
The virus name is TR/Obfuscated.XY.3379 trojan.

Please fix it and release a clean patch

Erez