THE FORUM HAS MOVED, VISIT US AT OUR NEW SITE www.picbasic.org. Access to this Archive is restricted. Visit the NEW site at www.picbasic.org. Unless you use the url http://www.picbasic.org you will not gain access to the support forum, wiki and knowledge base. Visit WWW.PICBASIC.ORG Do not try to log in or register here, use your keyboard and enter the url http://www.picbasic.org directly into your browser.

Stynus · 8th October 2005, 12:58

Hi, I have here a 4*27 character Lcd and I want to control this in picbasic. Now the problem is that this lcd has 2 controllers 1 for the 2 upper rules (uses wire EN1) and for bottom 2 rules (EN2).
The other connections are the same as a "normal" lcd. how can I solve this in the software?

I have a datasheet(german) from the lcd here: Link1 link2 (different datasheets)

Thanks,

Stynus

Stynus · 8th October 2005, 14:01

I think I posted it in the wrong subforum

See_Mos · 9th October 2005, 15:51

This was covered in this post
http://www.picbasic.org/forum/showthread.php?t=4590&

8th October 2005, 12:58	#1
Stynus Licensed User Join Date: Oct 2005 Location: Belgium --> Lommel Posts: 8	LCD problem Hi, I have here a 4*27 character Lcd and I want to control this in picbasic. Now the problem is that this lcd has 2 controllers 1 for the 2 upper rules (uses wire EN1) and for bottom 2 rules (EN2). The other connections are the same as a "normal" lcd. how can I solve this in the software? I have a datasheet(german) from the lcd here: Link1 link2 (different datasheets) Thanks, Stynus

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
18F4550 - Text LCD problem	johntabb	Proton Plus Compiler v3	27	6th December 2005 18:19
Another LCD problem	geraintwalesuk	Proton Plus Compiler v3	30	11th October 2005 22:07
LCD problem w/ cap "K"	Gary Brooks	Proton Plus Compiler v3	10	17th August 2005 10:13
Lcd 4 line timming problem	Cocoloco	Proton Plus Compiler v3	13	31st July 2005 19:33
LCD Poblem on PORTC & PORTE	Alex Finnon	Proton Plus Compiler v3	4	23rd June 2005 21:01

8th October 2005, 14:01	#2
Stynus Licensed User Join Date: Oct 2005 Location: Belgium --> Lommel Posts: 8	I think I posted it in the wrong subforum

9th October 2005, 15:51	#3
See_Mos Licensed User Join Date: Feb 2004 Location: Aberdeen Scotland Posts: 1,220	This was covered in this post http://www.picbasic.org/forum/showthread.php?t=4590&