• Pic® Basic


  • Crownhill Solderless Development System


    <img src="http://picbasic.org/images/products/solderless_01_med.jpg" style="float:right;" >
    From £24.95 <a src="#vat">1</a>


    Buy It Now: Direct | Find Reseller

    Introduction

    The PROTON Solderless Development System is the ideal platform for freeform prototyping of small / medium sized projects or building blocks for larger projects. It is also the perfect platform for educational and training environments.

    Features

    The solderless development board features:
    • InCircuit Programming Interface, for Epic® Programmer, or Crownhill PIC® BASIC Bootloader
    • On Board regulated 5V supply with LED Indicator
    • On Board RS232 interface
    • Detachable Solderless prototyping board
    • PCB Mirror image of Solderless prototyping board

    The solderless development board comprises of a Prototyping PCB, complete with Regulated Power supply circuit, RS232 I/O and In-Circuit programming interface to connect to the Epic® Programmer.

    The PCB exactly matches the connection grid of the Solderless Breadboard, supplied as part of the system. This allows a circuit to be built, modified tested and proven without the use of solder and fixed connections. The finished project can then be optionally stripped down and components re-used, or, transferred to the solderable prototype area and permanently built as a professional prototype, avoiding the cost of a custom made PCB.

    The solderable development area is a mirror image of the solderless bread board, thus no rewiring or additional modifications need to be made when transferring to a soldered solution. Further, the solderable development area is directly under the solderless breadboard allowing easy visual referencing to be achieved during the transfer.

    The solderless development system is a complete solution to small and medium sized projects where a freeform prototype area is required.

    Pictures








    Top View

    Front View





    1Pricing excludes Sales (or other applicable) Taxes, depending on your region <a name="vat"></a>

  • Recent Activity

    Oldhack-15978

    Num_Byte on 18F26K42

    Thread Starter: towlerg

    I'm using a macro that was created by the generator Dump Macro P1 #if (Prm_Count > 1) #error "Dump - Too many parameters" #else ...

    Oldhack Yesterday, 23:42 Go to last post
    John Drew-26

    Fault in bit wise comparisons on release 3.6.1.2.

    Thread Starter: kbaykar

    Hi Les, I just downloaded the release 3.6.1.2 today and seeing that it supports 18F47K40. I am trying to port my code from 18F4685 to 18F47K40. ...

    John Drew Yesterday, 13:41 Go to last post
    SimonJA-751

    Hx711 calibration

    Thread Starter: amod

    Iam using load cell amplifier HX711 module.I have got raw values from module but iam not able to calibrate with load cell.I want make a universal...

    SimonJA Yesterday, 07:38 Go to last post